Laboratory Electric Molybdenum Disilicide Mosi2 Heater
Hot Terminal Bent 90 Degree Laboratory Electric Molybdenum
Disilicide Mosi2 Heater
Molybdenum Disilicide Mosi2 Heater heating element for element temperature up to 1800C(3270F), Our
MoSi2 heating elements are available as straight or bent elements
in a wide range of shapes and sizes, All characterized by long life
and consistant perfomance.
We provide special designed MoSi2 elements according to customer
needs, enabling an optimized element design for each particular
application.
Delivery time: 7days after receipt of deposit.
What’s Molybdenum Disilicide Mosi2 Heater ?
Molybdenum disilicide(MoSi2) heating element is one resistance
heating component made from MoSi2 or as the basic material. When
it’s heated to high temperature under the oxidizing atmosphere, one
dense MoSi2film will be formed on its surface to protect the
element against oxidizing further. Therefore, the element has
unique anti-oxidation property under high temperature atmosphere.
The highest temperature can reach 1800°C, the applicable
temperature is between 500-1700°C.
Mosi2 heating element is a special product combined metal and
ceramics. So it has the characteristics of silicon and molybdenum.
Molybdenum disilicide (MoSi2) is a refractory metal silicide that
is primarily used as a heating element. In recent years, its
potential for use as a structural ceramic has been recognised, as
the material combines excellent oxidation resistance and high
elastic modulus at elevated temperatures.
Application: It can be used as heating elements of industrial high-temperature
furnace, like ceramics, magnetic materials, glasses, metallurgy,
refractories etc.
Application of Molybdenum Disilicide Mosi2 Heater :
| Item | name | distinction criterion | specification | Using range |
| Heating elements | 1700 type | Element operating temperature 1700℃ is acceptable | Le Φ 6-12W type/U type/L type/all kinds of hetero type / stripe shape | high temperature electric resistance furnace |
| 1800 type | Element operating temperature 1800℃ is acceptable |
| 1800J type | Element operating temperature≥1800℃ | Le Φ 3-12W type | Special,high temperature and high-power electric resistance furnace |
| 1800T type | Element operating temperature≤1800℃ | Le Φ 3-12W type U type | Not oxidized special air high temperature electric resistance
furnace |
Main features of Molybdenum Disilicide Mosi2 Heater :
1.The leading products of the company Molybdenum Disilicide Heating
Element Type 1700grade and 1800grade elements are high-tech
products researched and developed by experts from China and abroad.
2.MoSi2 heating element can quickly form a thin and adhesive
anti-oxidizing layer of quartz glass (SiO2), under the high
temperature oxidizing condition. If the protective layer was
damaged, the element can reform a new one, so MoSi2 heating
elements have a very good anti-oxidation properties, it also means
that the heating element can be used on operation for a much longer
time than the traditional one.
3.The resistivity of the Mosi2 heating element is not changing with
the time, so a new one can be installed without effecting the old
one. This can result of the huge saving in furnace maintenance fee
sand time as well, increase the working efficiency. This is the key
point of Mosi2 heating element being a better material and being
widely used.
Physcial property of molybdenum disilicide heating element MoSi2
rod:
| Density | Bending Strength | Hardness | Apparent Porosity | Water Absorption | Elongation | Fracture Toughness | Compressive Strength |
| 5.8g/cm3 | 350Mpa | 12.0Gpa | ±2% | 0 | 4% | 4.5Mpa.m1/2 | 650Mpa |
Packaging & Shipping
1. From the inside to outer packaging, is foam sponge, carton,
wooden case.
2. Sea or Air transportation, DHL express.
3. Please make sure the 'shipping address' is your confirmed
address.
4. We do check everything in good condition before we ship your
parcel out.
5. We will process your order ASAP after payment is confirmed.
Please tell us the following data of molybdenum disilicide MoSi2
rod heating element when send enquiry to us :
d = the diameter of hot zone ?
c = the diameter of cold zone ?
Le = the length of hot zone ?
Lu = the length of cold zone ?
a=Shank spacing
g=junction length
How many pcs ?
