SP-600PM Precious Metal Purity Analyser Meter Measuring Machine
Metal Purity Analyser Meter Specifications:
The high-precision digital solid density test equipment is mainly used in rubber, plastic, wire and cable, food, composite materials, shoe materials, glass, precious metal hardware
recovery and other industries. Solids, granules, thin-film body, the floating body, a powder body of the
sample can be directly read out the average weight, the average weight in the water, and the specific gravity
value, density, volume, the percentage in the
air,convenient and quick.
Metal Purity Analyser Meter Apply to
- Precious metal.such as gold,Karat gold,platinum,silver.
- Mixed metal or other alloy metal.
- Jewelry materials.such as ring,necklace,bracelet,watchband,belt
fastener,gold ingot,gold bar,statue,coin.,etc.
Metal Purity Analyser Meter
1, as long as 10 seconds (two steps) can be directly read the
specific gravity, the volume value, purity%.
2, the proportion of parts molding, will not cause water leakage.
3, RS-232C computer interface, and can be easily connected to the
PC and printer.
4, using the design of the large tank , to reduce the error caused
by the buoyancy of the hanging bar line.
5, can be directly set the temperature compensation setting
solution compensation setting.
6, the smallest weighing precision 0.005g, the proportion of
calculus precision 0.001g.7, we can set the standard density value of materials, direct read Purity%.8, the use
of corrosive liquids, optional anti-corrosion sink.
Density tester technical parameter :
| Model | SP-300PM | SP-600PM | SP-900PM | SP-1200PM |
| Weight | Range | 0.005~300g | 0.005~600g | 0.01~900g | 0.01~1200g |
| Standard deviation | 0.005g | 0.005g | 0.01g | 0.01g |
| Density | readability | 0.001 g/cm3 |
| Testing board | ABS injection moulding |
| Density range | 0.001~99.999g/cm3 |
| Result display | Apparent density,volume density,wet density,overall
porosity,effective porosity,open pore volume,bulk volume,oil
content,water absorption |
| Measuring time | About 5 seconds |
Opening lid method for testing board | Unobstructed without lifting lid design |
| Water tank | Completed injection moulding transparent PC water
tank(size:length15.3 cm×witdth10.7 cm×height9.3cm) |
| Parameter setting | Water temperature setting,measuring medium density setting,primary
materials and secondary materials setting,air density
setting,suspension wire buoyancy deviation setting |
| Calibration method | Single key calibration,automatically testing |
| Standard components | (1) host(2)water tank(3)testing board(4)tweezers(5)thermometers (6)weight(7)windproof dustproof cover(8)power transformer |
| interface | Standard RS-232 interface |
| Optional accessories | SP-40 printer,data connecting wire |
| Power supply | AC100V~240V 50HZ/60HZ (Europe standard) |
Metal Purity Analyser Meter Measurement Procedure
a) measure the gold weight in air,and then press the ENTER button
to memory.
b) Place the gold into water to measure the weight,and then press
the ENTER button to memory.show the K value of gold,purity
percent,density value.
Metal Purity Analyser Meter Standard accessories
Host,sink,test board,tweezer,thermometer,weight,wind and dust
cover,a set of measuring particle parts,a set of measuring floating
body parts,power transformer.
Contact us feel free if you have any special requirement .
