750kg Fast Heating Electric Furnace For Cast Iron Copper Melting
Casting
Electric Furnace ,adopt electromagnetic induction principle
manufacture, the electromagnetic field to direct effects on melt
material and heat generation.So, it's heat conversion efficiency is
high, does not produce waste gas pollution environment.b). At the
same time, due to the furnace shell is made of metal materials for
shielding electromagnetic field, so the environment around of
furnace does not produce electromagnetic radiation pollution.
Metal Scrap Melting Induction Furnace Technical Information :
| Product name and model | GW-0.15 Medium Frequency Induction Melting Furnace |
| Highest temperature | 1650°c |
| Temperature accuracy | ±5°c |
| Load capacity | 150Kg |
| Melting rate | 200Kg/hour |
| Medium Frequency power | 200KW |
| Melting frequency | 1000Hz |
| Power consumption | 0.7KWh/Kg |
| Induction coil voltage | 750V |
| Water consumption | 15 tons/hour |
| Power supply | AC,3-phase,208/380/400/415/440/465V,50/60Hz |
| Tilting furnace device | Electric reducer |
| transformer capacity | 200KVA |
| Induction coil voltage | 1000V |
Description of electric furnace:
1. The power cabinet body is designed with a fully enclosed
structure, and the cabinet is made of 3mm steel plate. The
protection class is IP54. The main power cabinet adopts a split
modular design, which facilitates the installation and
transportation of equipment. All the originals used in the whole
system are from well-known brands with reliable quality, and they
must be rigorously tested and screened after the factory.
2. This set of equipment can realize fully automatic remote
control, including PLC programmable controller, HMI man-machine
interface or industrial control computer system, industrial control
configuration software and various sensors. It can realize
automatic operation,such as automatic constant temperature,
automatic oven and anti-wearing furnace alarm, which is safer and
more convenient to use.
3. This series resonant dual-supply Intermediate frequency power
supply is also equipped with a computer-aided management system.
Not only can display real-time data and information of power supply
operation, but also display the operating status and information of
the entire system, and has functions such as automatic insulation,
oven, furnace start, and fault archiving.
Metal Scrap Melting Induction Furnace Performance
1. Using a zero-voltage scanning soft-start mode, in any case may
at any time to start or stop, will not have impact on power supply.
2. Fast smelting with low production cost; low-pollution and
environment-friendly ;
3. A direct effect from the cold furnace melting. Dissolved
material will be fully dumped clean. Molten material easy to
replace.
4. Power adjustment flexibility. Be able to continuously smooth
adjustment. Temperature uniformity can be easily controlled.
Oxidation burning less. Metal components evenly.
5. Furnace shell using cast aluminum or steel structure, small
footprint; furnace flip dump convenience, according to the need to
use electric, manual, hydraulic tilting furnace and other means.
6. Designed to automatically adjust angle of inverter circuit that
can automatically adjust the load impedance match, without
adjustment of capacitance compensation and always run the equipment
in good working condition; power supply system diagnostic error
function, easy maintenance.
Packing: Usually machine is packed with wooden case and standard
export carton, plywood carton or as your requirement.
Port:Tianjin,Shanghai,Qingdao
Ship: By sea/air/train/car
