KGPS 500kg Induction Electric Furnace Smelting Steel Iron Metal
Industrial Furnace
Application of induction electric furnace:
Induction Electric Furnace , mainly used in melting point is lower
than 1600. C metal melting and purification, fusion metal alloy
material.It is widely used in industry production for metallurgy,
casting, alloy workpiece manufacturing etc.Also by the laboratory
select and use for metallurgy process research, casting process
research, alloy process research, etc.Because it does not produce
by waste gas, waste water and noise etc.,does not polluting the
environment, so it is replacing the traditional metal smelting
melting equipment.
Instruction overview for melting furnace
This equipment is composed of furnace body, tilting controller,
water cooled cable, capacitor, medium frequency, water cooling plant.
1. Furnace Body
Furnace structure has four type, aluminum reduction tilting
furnace, aluminum hydraulic furnace, magnetic shielding steel
furnace and hydraulic steel furnace reduction tilting furnaces
equip with reduction machine, hydraulic tilting furnaces equip with
hydraulic pump and work station. The whole sets generally have two
furnaces using for melting and maintenance. Induction coil installs
in the central of the furnace, it has spiral body with rectangular
empty brass circle around, the pipe center should be cooled with
water. Copper bar outside induction coil will connect with
water-cooling cable. The lining closes to induction coil, which
made by burden, the method you can find in related parts below.
2. Tilting Controller
The controller is a control box for tilting furnace. The switch on
the controller can choose furnaces and the button can move around
through the rubber soft line, and also control the furnace for
tilting and resetting (this part should be installed by users
themselves).
3. Water-cooled cable
Water cooled cable is made of soft copper wire, hose,cable end,
through them to connect with
capacitor and furnace.
4. Capacitors
Capacitors compose of electric heat, holder, the converge-wires. it
supply power.
5. Medium Frequency power cabinet
Medium frequency power cabinet will transmute three-phase ac power
frequency into medium ac power.
6. Water-cooling plant(Prepared by user)
Water cooling plant include water inlet and outlet water tank, it
supply for an induction coil. water-cooled electric cable and
cooling water in capacitor, can be divided into five ways, usually
using only three way(once melting furnace does not work the water
in the induction coils and cooling cable can be close down through the valve).
Technical parameter of electric induction furnace:
| Model | Loading capacity (kg) | IF power (kw) | supply voltage (V) | IF-FRE (Hz) | Melting Rate (kg/h) | Power consumption (KWh/kg) |
| GW-0.05 | 50 | 45 | 380/400 | 1000 | 45 | 0.56 |
| GW-0.1 | 100 | 85 | 380/400 | 1000 | 85 | 0.56 |
| GW-0.15 | 150 | 135 | 380/400 | 1000 | 125 | 0.55 |
| GW-0.25 | 250 | 250 | 380/400 | 1000 | 200 | 0.55 |
| GW-0.35 | 350 | 300 | 380/400 | 1000 | 300 | 0.67 |
| GW-0.5 | 500 | 400 | 380/400 | 1000 | 350 | 0.67 |
| GW-0.75 | 750 | 500 | 380/400 | 1000 | 500 | 0.67 |
| GW-1 | 1000 | 800 | 380/400 | 1000 | 800 | 0.67 |
| GW-1.5 | 1500 | 1000 | 660 | 500 | 1200 | 0.61 |
| GW-2 | 2000 | 1250 | 660 | 500 | 1600 | 0.61 |
| GW-3 | 3000 | 1600 | 660 | 500 | 2400 | 0.61 |
| GW-4 | 4000 | 2300 | 660 | 500 | 3200 | 0.6 |
| GW-5 | 5000 | 3000 | 950 | 300 | 4500 | 0.6 |
Welcome to contact us if you have any demands on our electric
induction melting furnace ,we can produce according to its demands
.
