50x400mm Laboratory Vacuum Tube Furnace 1200C -0.1MPa Atmosphere
Control
Vacuum tube furnace characters:
1.The furnace tube adopts quartz tube as carrier and the stainless
steel flanges on its both ends are simple design, reasonable, easy
to disassemble and convenient for entering and leaving sintered
samples
2. The machine will send out an alarm signal to the
over-temperature during the working process, and automatically
complete the protection action.
3.The heating rate is fast, from room temperature to 1200 degrees,
generally takes 50-70 minutes
4. Furnace material is high-purity alumina ceramic fiber materials,
new assembly structure, no transformation in long term high
temperature, sturdy and durable
5. The heating element is made of high-quality alloy wire, which
can bear large load, stable and long service life
6. Electronic components are used Delixi products, with leakage
protection, safe and reliable
7. Using intelligent PID temperature control instrument, with
program function, can set the temperature rise curve, can be
programmed 30 segments
8. When the instrument program is set, just press the run button
and the next work will be completed automatically
9. It can be installed with a gas mass flowmeter, digital precise
control of the gas.
Furnace chamber
Vacuum tube furnace main technical parameter :
| Product name and model | SP-1200T-54 vacuum tube furnace |
| Heating tube size(OD×L) | Dia50x400mm |
| Chamber insulation materials | light weight aluminum oxide fiber ceramic |
| Maximum temperature | 1200°C working time ( < 3 hours) |
| Working temperature | 400-1100°C (adjustable, for long time ) |
| Temperature control | Intelligent 30 segments programmable and PID auto control |
| Heating rate | 1-15℃/min (adjustable) |
| Temperature accuracy | ±1℃ |
| Thermocouple | K type |
| Heating element | resistance wire |
| Ultimate vacuum | -0.1Mpa |
| Vacuum pump specifications model | 0.5A, pumping rate 0.5L/S, power 120W |
| Furnace shell | Double shell with fan cooling |
| Temperature display mode | Four Figure Liquid Crystal Display |
| Working power | AC 1-phase, 110V-240V, 50Hz/60Hz |
| Rated power | 2KW |
| Spare function | installed computer communication module and RS485 communication
interface,to realize the remote control. (If there need spare
function, cost will be added |
Stanard model of SP 1200C vacuum tube furnace
| Model | Heating zone (OD×L mm) | Work power | Vacuum pump specifications |
| SP-1200T-53 | Φ50x300 mm(2.0"x12") | AC 1-phase/3-phase 110V-400V 50Hz/60Hz. | TW-0.5A;0.5L/S;120W;110V/220V |
| SP-1200T-54 | Φ50x400 mm(2.0"x16") | TW-0.5A;0.5L/S;120W;110V/220V |
| SP-1200T-55 | Φ50x500 mm(2.0"x20") | TW-0.5A;0.5L/S;120W;110V/220V |
| SP-1200T-63 | Φ60x300 mm(2.5"x12") | TW-0.5A;0.5L/S;120W;110V/220V |
| SP-1200T-64 | Φ60x400 mm(2.5"x16") | TW-0.5A;0.5L/S;120W;110V/220V |
| SP-1200T-65 | Φ60x500 mm(2.0"x20") | TW-0.5A;0.5L/S;120W;110V/220V |
| SP-1200T-83 | Φ80x300 mm(3.2"x12") | TW-0.5A;0.5L/S;120W;110V/220V |
| SP-1200T-84 | Φ80x400 mm(3.2"x16") | TW-0.5A;0.5L/S;120W;110V/220V |
| SP-1200T-104 | Φ100x400 mm(4.0"x16") | TW-0.5A;0.5L/S;120W;110V/220V |
| SP-1200T-154 | Φ150x400 mm(6.0"x16") | TW-1A;1L/S;120W;110V/220V |
Our Warranty:
One year limited warranty with lifetime support, excluding heating
element and ceramic tube damaged by user.
Attention: Any damages caused by the use of corrosive and acidic gases, and
any damage from wrong operate and use are not under the coverage of
One Year Limited Warranty.
Our advantages:
♥ We are a manufacturer in China. So we can control the cost well.
♥ We use the top material in our furnace, imported ceramic fiber
and accuracy temperature controller.
♥ We supply good service after sale, you can be assured about that
